High Voltage Tester (Hipot Tester)
AC Hipot & Dielectric Strength Test System, Up to 11 kV
Model: PE 100
Dielectric Strength Testing for Appliances, Motors & Switchgear
An AC hipot tester that generates a controlled high voltage to confirm insulation between live parts and accessible conductive surfaces can safely withstand operating conditions without breakdown. Leakage current is continuously monitored and the test stops automatically if the preset safety limit is exceeded, protecting both the operator and the product under test. Available in voltage ranges up to 11 kV AC.
Key Features
Applications
Technical Specifications
Test Voltage Range
0–1 kV / 0–5 kV / 0–11 kV AC, selectable.
Test Current Range
0–30 mA / 0–100 mA / 0–200 mA, selectable.
Resolution & Accuracy
0.01 kV / 0.1 mA resolution, ±0.6% ±1 count accuracy.
HV Control
Single-button Start, Stop, Pause & Resume.
Programmable Timer
1 sec to 9999 hours.
Display
Three 4-digit digital displays: Voltage, Current, Timer.
Indications
HV ON/OFF, SAMPLE OK/FAIL LEDs with audio buzzer.
Remote Probe Switch
Momentary start switch provided on the HV probe.
Memory Backup
Automatic restart after power failure with stored settings.
Power Supply
230 V AC ±10%, 50 Hz.
Dimensions (L×H×D)
300 × 180 × 220 mm.
Product Video
Frequently Asked Questions
Certifications
Calibration: NABL calibration certificate available on request with every tester, and recalibration service available for installed units.
Available Ranges & Typical Use
| Option | Range | Typical use |
|---|---|---|
| Voltage | 0–1 kV AC | Low voltage electronics, small appliances, components |
| Voltage | 0–5 kV AC | Home appliances, motors, transformers, control panels |
| Voltage | 0–11 kV AC | High voltage motors, transformers, switchgear, cables |
| Current | 0–30 mA | Low capacitance products, routine production testing |
| Current | 0–100 mA | Motors, transformers, medium capacitance loads |
| Current | 0–200 mA | Large motors, long cables, high capacitance loads |
Standards & Compliance Testing
Suitable for the dielectric strength (hipot) tests called for in standards such as:
| Standard | Typical product |
|---|---|
| IEC 60335-1 / IS 302-1 | Household and similar electrical appliances |
| IEC 61010-1 | Measurement, control and laboratory equipment |
| IEC 60204-1 | Electrical equipment of machines and control panels |
| IEC 60034-1 | Rotating electrical machines (motors) |
| IEC 60076-3 | Power transformers |
Test voltage and duration are set by the standard that applies to your product. We can help you select the right range.
How to Choose a Hipot Tester
- Test voltage: Product standards commonly specify 2 × rated voltage + 1000 V. Choose the 1, 5 or 11 kV range that covers the highest test voltage you need.
- Test current: Select 30, 100 or 200 mA based on the capacitance and leakage of your product. Higher-capacitance loads such as long cables and large motors need a higher range.
- Test duration: Typical production tests run for 1 to 60 seconds. Use the programmable timer to match your standard.
- Usage: Production lines benefit from the remote probe switch and PASS/FAIL indication. Laboratories benefit from pause and resume control.
Related Products
Request a Quotation
Tell us your requirement and we will respond with the right configuration and pricing.
Ready to Discuss Your High Voltage Testing Requirement?
Our technical team is ready to help you configure the right voltage range, current range and timer settings for your application.
