Applications:
Premier Electrosystems' Standing Loss System is used to calculate the energy consumption measurement of a filled water heater, after steady state conditions have been reached when connected to electrical supply and when no water is drawn for a minimum of 48 hours.
The star rating for the electric geysers is given based on the standing losses. Standing loss or heat/energy loss of a water heater to the surrounding in 48 hours is an important factor used by BEE (Bureau of Energy Efficiency) to decide on star rating of a water heater.
The unit of Standing Loss is Energy consumed per 24 hrs for a difference of 45 ° C (kWh/24 hrs/ 45 ° C).
STANDING LOSS TEST SYSTEM STAR RATING CALCULATOR FOR GEYSER
Premier Electrosystems' Standing Loss Test System
Designed to suit the requirement of IS: 2082, and other similar standards.
SPECIFICATIONS:
- Voltage:
Range: 0-300.0 V
Least Count: 0.1 V - Current:
Range: 0-20.00 Amp
Least count: 0.01 A - Wattage:
Range: 0-10.000 W
Least count: 0.001 W - Energy (KW-h):
Range: 0-99.000 Kwh
Least count: 0.001 KWh - Temperature:
Type: RTD- rod type with nut mounting to directly fit into geyser outlet pipe.
Range: 0-100.0 ° C
Least count: 0.1 ° C - Room temperature sensor:
Type: TC- K type
Range: 10-60 ° C
Least count: 1 ° C
LOGGING SECTION:
- Logging of above 6 parameters directly into pen drive
- Log rate settable from 15 sec onwards up to 99 sec
- Inbuilt Real-time clock
PC SOFTWARE:
- Direct report generation
- Easy access to raw data
- Easy option to create graphs of data
Inclusions:
- Modular fitting box for panel mounting arrangement
- All sensors, CT's calibrated as per NABL
- Pen drive- 8 GB
Screenshot of the software
