Applications:
TIMERS Premier's Timers are microcontroller based units that can be used as delayed on timer, delayed off timer, cyclic timer. These timers are programmable to suit any requirement.
![](../assets/img/products/pc81.gif)
1.DIGITAL TIME INTERVAL METER
Model : PE 7000
'START' signal from potential free NO/NC contact.
'STOP' signal from potential free NO/NC contact.
View DetailsTECHNICAL SPECIFICATIONS
- Ranges: 0-9999 milliseconds/seconds/min
- Display: 4 digit, 0.5" ht, red LED
- Resolution: 1 ms/0.1 sec/1 sec/1 min
- Accuracy: 0.05% ± 1 count
- Time base: Quartz crystal based oscillator
- Reset: Push to reset push-button
- Supply: 230 V AC ± 10% 50 Hz
- Dimensions:
- 72(H) x 72(W) x 65(D) mm
- 96(H) x 96(W) x 65(D) mm
- Weight: 300 g
- OPTIONS:
- Remote Reset facility
- 6 digit, Time interval Meter with 0.3" ht/5" Ht red LED display with Mechanical Dimensions of 72mm x 72mm x 110mm or 96mm x 96mm x 150mm respectively
![](../assets/img/products/thumbwheel.png)
2.PRESET COUNTER- THUMBWHEEL BASED
Model : PE 7104
Available in 2, 3 and 4 digit miliseconds/seconds/minutes/ hour range.On delay or Off delay.
Elapsed time/ Remaining time indication.
View DetailsTECHNICAL SPECIFICATIONS
- Ranges: 0-9999 milliseconds/seconds/min/hour
- Display: 4 digit, 0.5" ht, LED display
- Resolution: 0.001/0.01/0.1/1 - Selectable and seconds/min/hour selectable
- Accuracy: 0.05% ± 1 count
- Time setting: 2/3/4 digit Thumb wheel switches
- Control Action: Delayed ON/Delayed OFF
- Output: 2 relay
- Start: Front Start/Power On start/PNP switch/NPN switch/Contact switch
- Reset: Push to reset push-button/External reset
- Supply: 230 V AC ± 10%, 50Hz
- Dimensions (h*w*d, in mm):
- 48 x 48 x 110
- 72 x 72 x 65
- 96 x 96 x 65
- Weight: 500 g
![](../assets/img/products/pc83.png)
3. DIGITAL ON/OFF TIMER
Model : PE 7272
View DetailsTECHNICAL SPECIFICATIONS
- Operating Modes: On delay/Off Delay/Cyclic On-Off/Forward Reverse With Hold Time
- Range: Programmable from 0.01 sec to 9999 hrs
- Display: 2 rows of 4 digit, 0.5" ht, white LED and 4 digit, 0.39" ht, green LED
- Resolution: Selectable (10 ms/1 second/0.1 min/1 minute/1 hr)
- Setting: ON time, Off time setting, cycles adjustable by keypad
- Output:
- Two Relays
- Output 1: On Delay, Off Delay, Cyclic with On First, Cyclic with Off First
- Output 2: Auxiliary, Invert, Cycle End
- Timer Start: Power On Start, Manual Start, Remote Start
- Supply: 90-270 V AC/DC, 50 Hz
- Dimensions (h*w*d, in mm):
- 72 x 72 x 65
- 96 x 96 x 65
- 48 x 48 x 110
- Weight: 300 g
Below is a video of our cyclic timer