Applications:
Premier's Safety Test Panel for appliances comprises of tThe tests prescribed in IS. The Panel Carries out different tests sequentially, one after the other. The test results are dispayed as PASS or FAIL. It is very useful for line or production testing of appliances or other products. The tests carried out are: High Voltage Test (HV), Earth Contact Resistance Tester (ECR), Insulation Resistance Test (IR), Leakage Current Test (LCT), Performance Test (Voltage Current Wattage) A special purpose socket is provided for easy connection of the unit under test. The time for each test can be set by the user. All tests can be completed in less than 15 seconds. The final result is given on the display. It also has a manual mode if the user wishes to perform only a single test or a test skip mode, where the user can select the tests he wants to perform.
AUTOMATIC TEST PANEL
MODEL :AUTOTESTER - PE-123
- Carries out HV test, ECR test, Leakage current test, Insulation Resistance Test, and wattage test automatically & sequentially.
- Digital Indication of all the parameters with accuracy of class 1 or better.
- User adjustable set value parameters - on front panel controls.
- Auto/Manual operation.
- Test ON and test FAIL Indication by means of individual LEDs & Final Pass and Fail indication.
- Facilities to bypass any test / tests.
- Test time continuously adjustable between 1 to 99 sec.
- Facility to abort the test cycle after any test failures.
- Easy to operate even by unskilled person.
- Supplied with an attractive, transparent, rugged acrylic box with built-in limit switch to house the appliance under test.
- An ideal Automatic instrument to carry out Pre Dispatch Safety Tests of industrial / domestic appliances.
- Designed with relevant ISI drafted specifications.
- Calibration certificate traceable to international standards meeting ISI requirements.
SPECIFICATIONS :
HIGH VOLTAGE TEST:
- Test Voltage: 0 to 1.50 KV continuously user adjustable by means of Dimmer
- Test current: Up to 30 mA settable by keypad.
- Set Point: Digital Setpoint for Test Current
EARTH CONTACT RESISTANCE TEST:
- Test Current: 0 to 25 Amp adjustable by means of dimmer
- Test Voltage: 0 to 6.00 V
- Resistance: 0 to 1.999 Ohms, calculated automatically.
- Set Point: Digital Set point for Resistance.
INSULATION RESISTANCE TEST:
- Test Voltage: 500 V DC
- Resistance: 0 to 200 M Ohm
- Set Point: Digital Set point for Resistance.
LEAKAGE CURRENT TEST:
- Range: 0-1.999 mA from Line to Body & Neutral to body, both displayed simultaneously
- Set Point: Digital set point for Leakage Current
PERFORMANCE TEST/ VAW TEST:
- Measures the voltage, current, wattage, Power Factor, Frequency of the device under test
- Test Voltage: 0 to 300V user adjustable by means of Dimmer
- Current: 0 to 20 A or as per requirement.
- Wattage: 0-5000 W
- Set Point: Low and High Set point for Wattage.
FEATURES:
- Compact size suitable for table-top placement: 500 mm (w) x 350 mm (h) x 400 mm (d)
- If the actual test parameter crosses the set limit, corresponding red LED indicating test failure comes on.
- Control has been provided to bypass any test/tests if desired.
- Facility to abort the test cycle after test failure is provided.
- After the complete test cycle, test over indication comes on.
- Reset facility by means of a push button switch has been provided to reset the system.
- The system in manual mode can be selected to perform any one of the tests.
- The test cycle begins by pressing the START push button & can be stopped in between if desired by pressing the STOP push button.
Check one of our automatic test panel:
TEST PANEL WITH MECHANICAL FIXTURES
We also manufacture test panel for specific testing purpose which includes mechanincal fixtures. Some examples are shown below:
1. Test Panel for Steaming Rate (for irons)
This test panel is designed as per IS requirements.
