MODEL : PE 8000

Premier's Glow Wire Test Appratus for checking of Resistance of insulating material to abnormal heat and fire
TEMPERATURE CONTROLLER SECTION :
Display : 4 digit, 12.5mm ht, red LED for Process Value
4 digit, 12.5mm ht, red LED for Set Value
Input : Cr/AL 'K' type Thermocouple
Range : 0 to 1200 C.
Resolution : 1 °C
Accuracy : +/- 0.5% +/- 1 count .
Control Action : PID or ON/OFF (selectable)
Setting : By means of Membrane key Switches
Output : One Changeover relay contact
PRESET TIMER SECTION:
Display : 4 digit, 12.5mm ht, red LED for Process Value
4 digit, 12.5mm ht, red LED for Set Value
Range : 0 - 999.9 Sec
Resolution : 0.1 Sec
Accuracy : 0.05 % +/- 1 count
Input : from Limit Switch /relay contact
Set Point : One No, Adjustable by membrane key switches
Output : Internal to start Time Interval Meter
TIME INTERVAL METER SECTION
Display : 4 digit, 12.5mm ht, red LED
Range : 0 - 999.9 Sec
Resolution : 0.1 Sec
Accuracy : 0.05 % +/- 1 count
Input : from Preset Timer - Internal
Stop : Push button provided - Manual
TEMPERATURE RISE TEST
Test Voltage : 0 to 6 V AC measured on 4 digit 0.5 " ht. red LED
Display, 0 - 20.00 Volt range
Resolution : 0.01 Volt
Accuracy : 0.6 % +/- 1 count
Test Current : 0 - 30.0 Amp Continuously adjustable by means of variac
Display, 0 - 30.0 A
Resolution : 0.1 A
Accuracy : 0.6 % +/- 1 count
FACILITIES :
Push Button Controls for Glow Wire Test ON
Temp Rise Test ON
Test OFF/OVER
External Temperature measurement selector switch with i/p terminals

Check our Glow Wire Tester:

If you are unable to see the video, Click Here