BATTERY TESTER / ELECTRONIC LOAD TWO MINUTES DISCHARGER
Premier’s Battery Tester are suitable for testing different Batteries for monitoring its Load Characteristics.
It indicates instantaneous Battery Voltage with facility to Set and read the Load Current of the Battery under test. Digital Timer is also provided to measure the Time duration of the Loading Test. The moment Battery Voltage drops below Lo Battery voltage level, the test stops automatically and displays the time taken.
Battery Voltage is indicated on 3½ digit, 0.5”ht red LED display. Facility is provided to set the LO BATTERY Voltage Limit by means of Coarse and Fine potentiometer so as to disconnect the load at that instant Constant Current Electronic Load with capacity of 0 to 20 Amp read on 3 ½ digit 0.5”ht red LED display and continuously adjustable by means of Coarse and Fine potentiometers is provided. Current range can be modified to suit any requirement.
Digital Timer with 4 digit 0.5" ht red LED display indicates the total time duration in Seconds/Minutes.
Premier’s Two Minute Discharger Model, facility is provided to set the Time in seconds( say 120 Sec) on 3 digit thumbwheel switches. The Battery Tester applies the Set Load for the time duration Set on thumbwheel switches and monitors the Battery Voltage , and at the end of the test duration latches the last Battery Voltage reading. Thus this can be used for Pre- dispatch Inspection of the Batteries.
Facility of RS 232/RS 425 can be provided to connect the system to a computer. Premier’s Model PE 2500 Datalogger can be used with this to get the trend of Battery Voltage, Battery Load Current at corresponding real Time. This data can be downloaded on computer for reports generation in Text as well as Graphical form.
Technical Specifications :
( 1 ) Premier s Battery Tester with Electronic Load.
230 V AC +/- 10% , 50 Hz.
Battery Voltage displayed on 3 ½ digit 12.5 mm ht red LED Display having 20 V range with 0.01 v resolution and 0.1% Accuracy
Constant Current type – Continuously adjustable by Pots-displayed on 3 ½ digit 12.5 mm ht red LED Display having 25 A range with 0.1 A resolution and 0.1% Accuracy.
0 – 9999 Min Timer displayed on 3 digit 12.5 mm ht red LED Display 1 Min resolution and 0.1% Accuracy – Time adjustable on 4 digit Thumbwheel switches.
The system will have the facility to set the Load Current (max up to 25 Amp) And also Test Time duration. The system will display the battery voltage. And with Start button Load the battery by constant current through an Electronic Load as SET by the potentiometric ( Coarse & Fine ) Controls for the Set time duration.. At the end of set duration will disconnect the load and Voltage indicator will latch to the last reading of drained Battery Voltage.
Max 25 A/50 A
Suitable for 12 V DC.
( 2 ) Premier s Computerised Battery Tester with Electronic Load.
PE 9100 M – PC
Technical Specifications and operation details as per item 1 and with a facility to connect the Battery Tester to a suitable latest P4 PC for getting the data of Discharge Pattern ( Time v/s Battery Voltage ) in tabular as well as graphical form Suitable Software will be supplied Max Current 25Amp / 50 AMP.